Check out our YouTube Channel

Fuel Pump Controllers Part 2 - Diagnostics

In part 1, we talked about the basics of a fuel pump controller (FPC), why it's essential, and how it works. This part 2 post will discuss common issues and how to diagnose them. Simplify your testing with our FPC Diagnostic Jumper! To do this you'll need a multimeter. We carry a...

SI-Drive - What is it and how does it work?

SI-Drive or Subaru Intelligent Drive is a button that changes engine computer mapping and the transmission computer mapping if the car is equipped with an automatic transmission. The engine computer will change the throttle response and target boost to maintain fuel efficiency. There are three different settings. Sport - This is the default position...

3 Pin TGV to 5 Pin TGV Comparison

This post discusses the differences between 3-pin TGVs and 5-pin TGVs. What is a TGV? A TGV or Tumble Valve Generator is a piece of emissions equipment that reduces the air into the engine when only a small amount of air is required. It's located in between the heads and the upper intake manifold...

What is a Fuel Pump Controller (FPC) Part 1

This blog post discusses what a Fuel Pump Controller is, what it does, and how it works. If you want to diagnose a fuel pump controller issue (P0230), please take a look at part 2 by clicking here. Simplify your testing with our FPC Diagnostic Jumper! For more about fuel pump...

Cruise Control and your Subaru

In this blog post, we review cruise control in your Subaru and the options available when doing an engine swap and wanting to retain or add in cruise control.  How Does Cruise Control Work? There are three types of cruise control depending on your type of Subaru. In general, a cruise control...

Subaru Engine Swaps and the California BAR/State Referee Process

In this post, we'll talk about the engine change guidelines for the state of California and the BAR engine change referee process. We'll include the critical information you'll need to know if you are looking into this process when swapping your Subaru. This is not a specific guide for any particular...

How to Identify an Automotive Connector

In this blog post we go over how to identify a plug or receptacle for your electrical project. These tips generally apply to all car makes but we reference Subaru since that's our specialty.  Watch the video below to have Whitney show you what you need to know!

Swapping your Subaru Automatic Transmission (Automatics Part 2)

This is part 2 about Subaru automatic transmissions. If you haven't read part 1, please start by clicking here. The following post is about what happens with swapping the automatic transmissions as a replacement and/or with an engine swap.  Cliff Notes If your car came with an automatic transmission and you...